Black Box Compact T1 MT850A Manual do Utilizador descarregar pdf (Página 24)

20 Compact T1 - Release 6.1

Quick Start

Local and Remote Management Option

This Quick Start Guide will focus on CLI and DIP switches. If you need further

information on other management options, please refer to the Compact T1 User

Manual.

l Local using CLI, Telnet, SNMP or DIP Switches (Controller and voice cards)

l Remotely over an in-band DS0 or through the Access Navigator over the FDL or

an in-band DS0

Command Line Interface (CLI)

You can access the CLI using either of the following methods:

l RS-232 connected to the DB-9 port.

l Telnet via Ethernet (10Base-T)

Setting up a CLI connection

To connect to the CLI via the RS-232 port, set up a connection to a PC serial port

or dumb terminal using Hyperterm, ProComm, or similar terminal emulation

software:

l Set the port settings to: 9600 baud 8/N/1/No Flow Control

l Set the terminal emulation screen size to 24 lines by 80 characters.

l The Compact T1 default is set configure locally (using DIP switches). Use the

set local off command to enable the use of CLI commands.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 41 42

Sem comentários

Black Box Compact T1 MT850A Manual do Utilizador Página 24