Black-box 5000 Manual do Utilizador descarregar pdf (Página 44)

100

101

Multiserver 5000

5.3 Inter-Module Stacking Connectors

The modules are powered via the stacking

connector located on the front right side looking

from the front of the Multiserver unit. In Figure 5-3,

the back of the unit is shown, and the connectors

are therefore on the left. A stacking connector has

two parts: a shroud and a block. The shroud is on

the bottom of the module being installed and fits

over the block on the module below. As you

position the module, align the shroud and the

block. Press the two together until the connector is

completely coupled. Make sure that the holes in the

front of the module are aligned with the pins on

the spacer.

STACKING

CONNECTOR

(BLOCKS)

SHROUD

BLOCK

FRONT

Figure 5-3. Inter-module stacking connectors.

BACK

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 267 268

Comentários a estes Manuais

Sem comentários

Black-box 5000 Manual do Utilizador Página 44

Comentários a estes Manuais