Black Box Code SW590A-R2 Manual do Utilizador descarregar pdf (Página 17)

3.9. Connecting and Powering Up the COS-II

Once you have configured the internal switches and

jumpers, you can connect your devices and the

wallmounted power jack to the COS-II. Before you

begin, you might wish to check the settings of all

the DIP switches again, to make sure you have set

them correctly.

To prepare the COS-II:

1. Make sure that SWA 8 is set to OFF, that is, to

normal operation.

2. Insert the 4-pin power-supply plug in the power-

supply socket (at J1) on the COS-II circuit board.

3. Slide the cover back onto the base of the COS-II,

and secure it with the screws.

4. Connect the device cables to the ports.

5. Plug the wallmounted power supply into a

standard AC line.

Before you use the COS-II, you might wish to

familiarize yourself with the indicators, reset button,

and self-tests available. Chapter 4 explains these

features.

CHAPTER 3: Installation

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23

Sem comentários

Black Box Code SW590A-R2 Manual do Utilizador Página 17