Black Box 24 port Guia do Utilizador descarregar pdf (Página 231)

Black Box Console Server user guide 231

How to setup BOOTP

Your nominated BOOTP server should be on the same network as the unit(s). The

BOOTP server can also be on a different segment of the same network, provided that

segment is connected by a bridge.

You can locate your BOOTP server on another network to the unit; this means that the

bootp request and replies have to pass through a router or gateway. You must configure

your router or gateway:

• to pass through BOOTP requests and replies

• for RIP

Note that if you have an existing unit, you do not have to enter the details of the gateway

or router into the unit before using bootp. Details of gateways or routers pre-configured

in the unit will be ignored during the bootp process.

The bootptab file entry

Find the bootptab file on the host; on UNIX systems the bootptab file is usually file /etc/

bootptab. Make an entry for the unit; an example for a single unit is shown at bootptab

file entry for a single unit on page 231 on page 231. An example for multiple units is

shown at bootptab file entry for multiple units on page 238.

bootptab file

entry for a

single unit

This entry should include the ethernet address of the unit. Other standard BOOTP tags

which the unit supports are listed below, together with the unit’s interpretation:

xxxxxx_blue:\

:ht=1:\

:ha=0080ba000057:\

:ip=192.101.34.211:\

:ds=192.65.144.44:\

:sm=255.255.255.224:\

:hn:\

:bf=/tmp/xxxxxxp.bfc:\

:dn=xxxx.co.uk:\

:gw=192.101.35.254

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 262 263

Sem comentários

Black Box 24 port Guia do Utilizador Página 231