Black Box Advanced Console Server Guia do Utilizador descarregar pdf (Página 339)

BLACK BOX® CS Installation, Administration, and User’s Guide 309

T To Configure CS Boot

1. Go to Administration > Boot Configuration in Expert mode.

The Boot Configuration form appears.

2. Enter the IP address of the CS in the “IP Address assigned to Ethernet”

field.

3. Accept or change the selected option in the “Watchdog Timer” field.

4. Select to boot from “Flash” or “Network” from the “Unit boot from”

menu.

5. Select “TFTP”, “BOOTP”, or “Both” from the “Boot Type” menu if you

have selected “Network” from the “Unit boot from” in step 4.

6. Accept or change the filename of the boot program in the “Boot File

Name” field.

7. If specifying network boot, do the following steps.

a. Enter the IP address of the TFTP, or BOOTP server in the “Server’s

IP Address” field.

b. Select a console speed from the “Console Speed” pull-down menu to

match the speed of the terminal you are using on the console port of

the CS.

c. Select “Skip” or “Full” from the “Flash Test” pull-down menu to

bypass or run a test on the flash memory at boot time.

d. Select “Skip”, “Quick”, or “Full” from the “RAM Test” pull-down

menu to bypass or run a test on the RAM at boot time.

e. Choose an Ethernet speed from the “Fast Ethernet” pull-down menu.

f. Specify the maximum number of packets that the CPU handles before

an interrupt in the “Fast Ethernet Max. Interrupt Events” field.

Fast Ethernet Max.

Interrupt Events

The maximum number of packets that the

CPU handles before an interrupt (0 is the

default).

Table 11-7: Expert > Boot Configuration Form Fields

Field Name Definition

1 2 ... 334 335 336 337 338 339 340 341 342 343 344 ... 391 392

Sem comentários

Black Box Advanced Console Server Guia do Utilizador Página 339