Black Box ACS111 Guia de Configuração descarregar pdf (Página 64)

Chapter 3 Installing and Configuring the Cisco Secure ACS Appliance

Initial Configuration

3-16

Installation and Setup Guide for Cisco Secure ACS Appliance

78-14573-02

To configure the Cisco Secure ACS Appliance, follow these steps:

Step 1 Establish a serial console connection to the Cisco Secure ACS Appliance; for

details see Establishing a Serial Console Connection, page 3-14.

Note If the Cisco Secure ACS Appliance is not configured (that is, it is new or

has been re-imaged) the system displays the system

information—including the software version.

Step 2 Confirm that the following information is displayed above the login: prompt:

Cisco Secure ACS: [version number]

Appliance Management Software: [version number]

Appliance Base Image: [version number]

Status: Appliance is functioning properly

The ACS Appliance has not been configured.

Logon as “Administrator” with password “setup” to configure

appliance.

Step 3 At the login: prompt, type Administrator and then press Enter.

Note When you boot the system for the first time, it is not configured. Logging in as

Administrator allows you to configure the system.

Result: The system displays the

password: prompt.

Step 4 At the password: prompt, type setup and press Enter.

Note The password is case sensitive.

Result: The system displays the following message on the console:

Initialize Appliance.

Machine will be rebooted after initialization.

Entering Ctrl-C before setting appliance name will shutdown the

appliance

Step 5 At the ACS Appliance name [deliverance1]: prompt, type the name you intend

to use for your Cisco Secure ACS Appliance, and then press Enter.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 147 148

Sem comentários

Black Box ACS111 Guia de Configuração Página 64