Black Box ACU5010A Especificações descarregar pdf (Página 26)

ServSwitch Uno/Duo USB Installation and Use Page 25

enable the mouse when the PC is initially booted.

If you have switched off your ServSwitch Uno/Duo USB or you are attempting to ‘hot

plug’ it into a system that is already running, you may be able to restore lost mouse

movement using the ServSwitch's mouse restoration functions.

Mouse restoration functions should be used with care as unpredictable

results may occur if the wrong mouse type is selected. If in doubt restore the

mouse by powering down the PC normally.

Standard PS/2 mouse data uses a different data format to IntelliMouse data and so

two reset functions are provided on the ServSwitch Uno/Duo USB. The type of data

format expected by the PC depends upon the driver and the type of mouse that was

connected when the driver was booted. The following table may be used as a guide.

Note that the mouse reset functions predict the likely mouse resolution settings but

may not restore the speed or sensitivity of the mouse exactly as they were when the

PC originally booted.

Type of mouse / system Driver type Likely expected Suggested

Connected at bootup data format restoration

PS/2 PS/2 only PS/2 Standard

PS/2 IntelliMouse PS/2 Standard

IntelliMouse / ServSwitch PS/2 only PS/2 Standard

IntelliMouse / ServSwitch IntelliMouse IntelliMouse IntelliMouse

To restore lost mouse movement on a CPU connected to the ServSwitch Uno/Duo

USB:

1) Select the CPU that has lost its mouse movement

2) Activate the on-screen menu using the keyboard hotkeys

3) Press F1 to view additional menus

4) Select the FUNCTIONS menu

5) Select RESTORE STANDARD MOUSE or RESTORE INTELLIMOUSE

6) Exit the on-screen menu

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 81 82

Sem comentários

Black Box ACU5010A Especificações Página 26