Black Box ACU5010A Especificações descarregar pdf (Página 59)

ServSwitch Uno/Duo USB Installation and Use Page 58

4.17 Using the Black Box extender

Refer to the installation guide provided with your Black Box extender.

We recommend the following extenders for use with the Uno / Duo USB.

ACU5010A

ACU1600A

You will also need one of the following cables to interface the extender to the Uno /

Duo USB

EHN428-006

When using an Black Box extender we highly recommend that you set the

extender's hotkeys to be different to the ServSwitch's hotkeys to avoid any

confusion.

4.18 What to do if you forget your ADMIN password

If you forget your ADMIN account password you will not be able to access the

ServSwitch Uno/Duo USB to add or edit users and computer names. If this

unfortunate situation does occur then you can resolve it by performing a complete

reset to return the ServSwitch to its factory default state. A complete reset erases all

the user names and computer names that you have setup. You can only perform a

complete reset if you have access to both the front and the rear of the ServSwitch.

To perform a complete reset and return the ServSwitch to its factory default state:

1) Power on the ServSwitch normally.

2) While the ServSwitch is powered on move switch 2 on the rear panel of the

ServSwitch (labelled UPGRADE) to the ON (down) position.

3) Press the USER and the COMPUTER keys together.

4) The green USER display will show 'r' for a few seconds to confirm that a reset is

taking place.

5) Return switch 2 to the normal OFF position (up).

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 81 82

Sem comentários

Black Box ACU5010A Especificações Página 59