Black-box COMPACT T1 MT850A Manual do Utilizador descarregar pdf (Página 210)

100

101

5-126 Compact T1 - Release 6.1

CLI Commands

set

set (router) mgcp up

Use the set (router) mgcp up command to start MGCP processing of incoming messages

and endpoint events. MGCP must be up for the Customer Media Gateway to properly

interact with an external call agent. The CMG notifies the call agent by means of one or

more Restart in Progress (RSIP) commands with the Restart Method parameter set to

"restart". An RSIP is sent for each voice channel which is configured as "up", after an initial

random delay of not more than 30 seconds. If MGCP is configured as up when a CMG

board reset or power cycle occurs, RSIP commands will be sent to the call agent when the

board is ready for MGCP operation. This command applies to the CMG Router card only.

Syntax: set {cmg_card-addr} mgcp up

Example: set 1 mgcp up

The example will start MGCP processing, with call agent with call agent

notification, for the CMG card in slot 1.

{cmg_card-addr}

The slot number (1-6) that contains the CMG card.

set (router) mgcp version

The set (router) mgcp version is an interoperability command to specify the version of the

MGCP protocol which is running on the Customer Media Gateway. This version must be

compatible with the version of MGCP running on the call agent. This command applies to

the CMG Router card only.

Syntax: set {cmg_card-addr} mgcp version {ietf01|ietf10|ncs}

Example: set 1 mgcp version ietf01

The example will set the MCGP protocol version to IETF version 0.1, for the

CMG card in slot 1.

{cmg_card-addr}

The slot number (1-6) that contains the CMG card.

{ietf01|ietf10|ncs}

ietf01 IETF MGCP version 0.1, as specified in an IETF MGCP Internet draft

ietf10 IETF MGCP version 1.0, as specified in IETF RFC 2705 (Default)

ncs PacketCable MGCP version NCS 1.0

1 2 ... 205 206 207 208 209 210 211 212 213 214 215 ... 591 592

Comentários a estes Manuais

Sem comentários

Black-box COMPACT T1 MT850A Manual do Utilizador Página 210

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Black-box COMPACT T1 MT850A