Black Box V5.1 Guia de Resolução de Problemas descarregar pdf (Página 16)

Euro MotoElectrics, 25958 Genesee Trail Road PMB 321 Golden, Colorado USA 80401 EDL-IGN Page 16 of 43

www.EuroMotoElectrics.com info@euromotoelectrics.com Tel: 1-303-526-0901

EnDuraSpark Electronic Ignition

Installation & Troubleshooting v5.1

Attach the brown wire to either the right or left coil

mounting bracket front bolt. (There may be other

grounding wires there).

Add the red wire to the switched power terminal on

the left coil, which already has a green/blue or green

wire attached. (If there isn’t a spare male spade

terminal available, extra ones are included in the kit).

Replace the black wire on the right coil going to the

condenser with the black wire from the EnDuraSpark

electronic ignition black box. Models with electronic

tachometers will have a second black wire connected

here

Many Airhead users have upgraded to Dyna or Accel ignition coils, especially dual plugging

conversions. They are wired in the same way:

Some users may have ring connectors connecting their wires to screw-type

coil terminals. The male spade terminals (part #8) can be used to attach the

EnDuraLast wires to these terminals.

Step 13: Connect Black Box Wires

Wheel Hub

To return to the stock ignition wiring

(if the old points and condenser were

left in place) simply swap these black

coil wires again.

Left

Coil

Right

Coil

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 42 43

Sem comentários

Black Box V5.1 Guia de Resolução de Problemas Página 16