Black Box IC108A Guia do Utilizador descarregar pdf (Página 81)

Advant

Smart Device (HART

) Interface User’s Guide

Section 3.3.5 Configuration of Smart Device (PLC) Parameters

3BUR 001 085R0001 REV A 3-27

SMART TAG

Name for the smart device of up to eight alphanumeric characters as specified during its initial

configuration.

NOTE

The SMART TAG value must be unique system wide.

SMART ADDRESS

Channel on the SHIM where the smart device is connected. You can connect up to four smart

devices to a SHIM-4, therefore, valid transmitter addresses for devices connected to a SHIM-4

are 1 through 4. You can connect up to eight smart devices to a SHIM-8, therefore, valid

transmitter addresses for devices connected to a SHIM-8 are 1 through 8.

NOTE

The entry for the SMART ADDRESS is not the polling address configured

within the transmitter. It is the physical channel where the transmitter is wired to

the SHIM.

CHANNEL

This is the starting CCF channel number that the smart device’s data relates to. CCF channel

number in the range of 1 to 32767 where the first of the smart device’s four (4) input values

(primary value, secondary value, tertiary value and fourth value) should be placed.

An Advant Controller may contains multiple types of I/O in which case the different I/O use

different tables. For example, one analog input FCM can access information from an analog I/O

input channel 1 without interfering with an FCM in another loop that accesses smart device

analog channel 1.

Field range is from 1 to 32767.

Default = 0

NOTE

There is only one analog smart device table in a subsystem to support smart

devices. For example, if a smart device uses channel 33 for an input, channel 33

cannot be used by any other smart device as input.

DESCRIPTION

General descriptor for the smart device of up to 24 alphanumeric characters.

You must complete a line of entries in the window for each smart device connected to the

SHIM. For example, if six smart devices are connected to the SHIM, complete six lines in the

edit window.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 117 118

Sem comentários

Black Box IC108A Guia do Utilizador Página 81